In The Lakes Learn The live map →

Learn · The working lakes · Lesson 3 of 7

Ports and infrastructure

A port is where the lake meets the railway and the road. Take one apart, piece by piece, and you can see how iron ore, grain and steel change from ship to train to truck.

See it live

Open More and switch on Infrastructure: six real ports are marked, Duluth-Superior, Two Harbors, Thunder Bay, Hamilton, Cleveland and Detroit. Tap one for its cargo and numbers, then Sail in to steer into the harbour at the helm, among its real buildings and piers and the ships AIS says are there now.

Take the tour

A make-believe Great Lakes port with a bit of everything: drag to turn it, pinch or scroll to zoom, and tap any part to see what it does. Then pick a real port to compare.

Loading the port…
Not to scale: a real port spreads over kilometres of shore.

Tap a part

A Great Lakes port

Ships come in from the lake between the breakwaters, follow a dredged channel under a lift bridge, and tie up at docks built for one kind of cargo each. Trains and trucks carry it on from there.

Pick a port to see its cargo and numbers.

For kids

Kindergarten to Grade 6

A port is like a giant loading dock for ships. Here are its parts:

  • Breakwaters: long walls of big rocks out in the water. They break the waves, so the water inside is calm.
  • A lighthouse at the end of the wall, so ships can find the way in at night.
  • A channel: a deep path dug into the lake bottom, because big ships need deep water. Red and green buoys mark its edges.
  • Docks, where ships tie up with thick ropes. Each dock is built for one kind of cargo.
  • Grain elevators: tall rows of concrete towers full of wheat and corn.
  • Ore docks: tall piers where trains dump iron ore pellets down chutes into the ships.
  • Cranes, piles, trains and trucks to carry everything on.
80 ft

The ore docks at Two Harbors stand up to 80 feet above the water, about as tall as an eight-storey building.

135 ft

Duluth's Aerial Lift Bridge lifts its whole road this high so ships can pass under.

7 h

About how long it takes to fill a thousand-footer with iron ore at Two Harbors.

Try this

Build a harbour in a tub. Fill a baking pan or bin with water. Use blocks or stones to build a breakwater with a gap in it, and float a toy boat inside. Make waves at one end with your hand. How calm is it behind the wall? What happens if the gap faces the waves?

For students

Grades 7 to 12

The anatomy of a port

Getting in. Ships approach between breakwaters, marked by pierhead lights and buoys, and follow a dredged channel. Rivers and waves keep filling channels with sand and silt, so they need regular dredging: Cleveland's Cuyahoga River needs about 225,000 cubic yards a year. In the U.S., the Army Corps of Engineers maintains federal channels. Inside, a turning basin gives ships room to turn, often with a tug. Where a road crosses the channel, a lift bridge raises its deck.

Tying up. A berth is a ship's place along a dock wall. Mooring lines run to bollards, and fenders cushion the hull.

Terminals, each built for one kind of cargo:

  • Dry bulk: ore docks load by gravity from rail cars; stockpiles of stone, salt and ore are unloaded by the ships' own booms and moved on by conveyor, loader and truck.
  • Grain: a grain elevator empties rail cars into pits, lifts the grain to the top of its headhouse, cleans, weighs and stores it in silos, and pours it into ships through spouts.
  • Liquid bulk: tanks and pipelines for fuels, asphalt and other liquids.
  • General cargo: steel, machinery and wind turbine parts, lifted one piece at a time by cranes. This is breakbulk or project cargo.

Landside. Railways and highways carry cargo to and from the docks; a port that links ship, rail and road is intermodal. Duluth-Superior has four railways: BNSF, CN, UP and CPKC.

Running it. In Canada, federal port authorities, such as HOPA Ports in Hamilton and the Port of Thunder Bay, run the big ports. In the U.S., port authorities often own little: Detroit's 18 cargo terminals are nearly all private, and almost all of Duluth-Superior's docks are too.

Natural and built harbours

Duluth-Superior's harbour is naturally sheltered behind two long sandbars, Minnesota Point and Wisconsin Point. Hamilton Harbour is behind a sandbar too, cut through by the Burlington Canal. Cleveland's outer harbour is mostly built: more than 5.5 miles of breakwaters. Detroit is a river port, with no breakwater at all.

Data challenge

Hamilton handled 10.35 million tonnes from 592 ships in 2025. What's the average load per ship? Duluth-Superior handled 25.3 million short tons. Convert that to tonnes (1 short ton = 0.907 tonnes) and compare the two ports fairly. Why might "busiest port" depend on how you count?

For adults

Going deeper

Six ports, two worlds

The map's Infrastructure layer has six ports built in 3D at the helm. Their headline numbers:

PortCargoLatest yearDepthLargest ships
Duluth-SuperiorIron ore, grain, cement, wind cargo25.3M short tons (2025)About 27 ft1,000-ft lakers
Two HarborsTaconite pelletsAbout 15.2M net tons (2024)About 28–30 ft1,000-ft lakers
Thunder BayGrain, potashAbout 10.7M tonnes (2025)Seaway depthSeaway-max
HamiltonSteel inputs, agri-food10.35M tonnes (2025)Seaway depthSeaway-max
ClevelandIron ore, limestone, salt9.2M tons (2022, harbour)29 ft entrance1,000-ft (outer harbour)
DetroitIron ore, steel, cementAbout 11M tons (2022)21–29.5 ft1,000-ft lakers

U.S. ports count short or net tons (2,000 lb); Canadian ports count metric tonnes (about 1.1 short tons). Harbour, port-authority and network totals measure different things, so don't compare headline numbers directly.

Six ports, two worlds. Duluth-Superior and Two Harbors load Minnesota iron ore and have shrunk with coal and steel. Thunder Bay and Hamilton have spread into grain, potash and agri-food and held steadier. Cleveland and Detroit feed U.S. steel mills and rise and fall with them.

What's changing

  • Steel. Iron ore is still the biggest cargo on the upper lakes, but its markets are shifting: Duluth-Superior's 25.3 million short tons in 2025 was its lowest since 1938, as Canadian steelmakers cut iron ore imports (Algoma Steel switched to electric arc furnaces) and coal fell away.
  • Agri-food and project cargo. At Hamilton, cargo other than steel grew from 19% of the total in 2008 to over 43% in 2024. Wind turbine parts and heavy-lift cargo cross Duluth's Clure Public Marine Terminal, where a US$27.5 million federal grant (2026) will rebuild a pier.
  • Winter. Ice is the network's growing weak point; see Commercial shipping.
  • Grain's long shift west. Thunder Bay's busiest year was 1983, at 22.4 million tonnes. Much Prairie grain now goes to West Coast ports instead, and Thunder Bay handled about 10.7 million tonnes in 2025, still among its best years in decades.
  • Who runs the ports. Canada's Canada Marine Act (1998) turned the big federal ports into Canada Port Authorities run on commercial lines, handed the Seaway's Canadian locks to the not-for-profit St. Lawrence Seaway Management Corporation, and passed many small public harbours to towns, provinces, First Nations or private owners.
  • Cities. Ports share their shores with downtowns, parks and marinas. Cleveland had a record 53 cruise ship calls in 2025.

Every laker that leaves Lake Superior for the lower lakes has to fit the Poe Lock, so the upper-lake ports' season runs with the Soo Locks, from about March 25 to January 15.

Go there

This lesson has real places you can visit in the simulations. Here's where to go, what to look for, and some extras that didn't fit above.

The Mackinac Bridge

Five miles of infrastructure, and how it was built to last.

The bridge from the air, looking along the main span.
The bridge from the air, looking along the main span. Justin Billau · CC BY 2.0
Crowds and cars on opening day, November 1, 1957.
Crowds and cars on opening day, November 1, 1957. Mackinac Bridge Authority · Public domain
Looking up at a tower from the road.
Looking up at a tower from the road. Chris Light · CC BY-SA 4.0
The Tacoma Narrows Bridge coming apart on November 7, 1940, a still from Barney Elliott's film.
The Tacoma Narrows Bridge coming apart on November 7, 1940, a still from Barney Elliott's film. Barney Elliott · Public Domain

Look for it in the simulation

  • Stop right under the main span and look straight up. Why is there sky showing through the middle of the road?
  • At the south tower, look at the pier's shape at the waterline. What's it built to do to ice?
  • At “Turn up the wind,” raise the wind until the deck leaves the amber line. Then try Tacoma's design. What's different?

Bonus: going further

  • A long time coming. A St. Ignace mayor ran an ad with a picture of a bridge in 1884, and Cornelius Vanderbilt II proposed one in 1888. Michigan found a bridge feasible in 1928. A causeway was built from St. Ignace from 1939 to 1941, then the war stopped the work. Construction finally began on May 7, 1954, and the bridge opened on schedule on November 1, 1957, for about US$99.8 million.
  • Down to the rock. The tower piers go 210 feet below the water, through 105 feet of mud and loose rock. Work ran only in the warm months: main piers in 1954, the rest in 1955, the cables and 28 approach spans in 1956. About 3,500 people worked at the site. Five men died: Frank Pepper, James LeSarge, Albert Abbott, Jack Baker and Robert Koppen.
  • Designed around a disaster. The Tacoma Narrows Bridge failed in 1940. So David Steinman gave Mackinac a deep stiffening truss, an open-grid road in the two inside lanes, open floor beams and double bracing, to let the wind through. The middle of the deck can still drift up to 35 feet in severe winds, slowly, and that's by design.
  • Designed around ice. Ice in the Straits can run eight feet thick or more. Steinman kept the bulk of each pier's concrete ten feet below the surface, used single piers so ice can't jam between them, and made them round where he could.
  • The numbers. About 26,372 feet long, with 3,800 feet between towers that stand 552 feet above the water. Ships get 155 feet of clearance at mid-span. There's 42,000 miles of wire in the two cables.

Read more: Mackinac Bridge Authority: facts and history; American Society of Civil Engineers: the Mackinac Bridge as a historic landmark; Civil Engineering magazine: Michigan's Mackinac Bridge tames the wind; Northern Michigan history: the Michigan state car ferry system. The rest comes from the simulation's own script and sources. Pictures are from Wikimedia Commons; select one to see its details.

The Soo Locks

A close look at one piece of infrastructure the whole system depends on.

The American locks from above in 2020, with the Canadian shore beyond.
The American locks from above in 2020, with the Canadian shore beyond. August Schwerdfeger · CC BY 4.0
Ten vessels share the old Poe Lock in 1905, when one lock could hold a fleet.
Ten vessels share the old Poe Lock in 1905, when one lock could hold a fleet. Unknown · Public domain

Look for it in the simulation

  • At the Poe, compare your boat with the thousand-footer next door. Why can't she use the lock you came through?

Bonus: going further

  • One lock holds up an economy. In 2021 the Poe handled 88 percent of the tonnage through the Soo. A 2015 Homeland Security study looked at a six-month closure: about US$1.1 trillion lost and 11 million jobs, with most U.S. steel stopping within weeks. It called the Poe “the Achilles' heel of the North American industrial economy.”
  • A second big lock is being built. The New Lock at the Soo goes in beside the Poe, so large ships finally have a backup. Its third phase reached the halfway mark in September 2026, with completion planned for 2030. Reported cost estimates run from about US$2.6 billion to US$3.2 billion.

Read more: U.S. Army Corps of Engineers, Detroit District: the Soo Locks; Parks Canada: Sault Ste. Marie Canal National Historic Site; Construction Equipment Guide (2026): the New Lock at the Soo reaches halfway; Engineering News-Record: the New Lock's cost estimate; Wisconsin Public Radio: the Homeland Security study of a Poe Lock closure. The rest comes from the simulation's own script and sources. Pictures are from Wikimedia Commons; select one to see its details.

Words to know: Breakwater · Pierhead light · Dredging · Turning basin · Lift bridge · Berth · Bollard · Fender · Ore dock · Grain elevator · Breakbulk · Intermodal · Port authority · Short ton and tonne

For teachers

Teacher notes

Big idea
A port is a machine for changing how cargo travels, built where water, land and people meet.
Great Lakes Literacy
  • 1 · The lakes are connected to each other and to the world ocean
  • 6 · The lakes and the people of their watershed are bound together
  • 8 · The lakes matter socially, economically and environmentally
Curriculum

Ontario

  • Grade 3 Social Studies, Living and Working in Ontario: B1.1, land use (example: ports on lakes or major rivers)
  • Grade 4 Social Studies, Political and Physical Regions of Canada: B1.2, shipping in the Great Lakes–St. Lawrence region (example)
  • Grade 8 Geography, Global Settlement: A3.2, water for transportation and industry
  • Grade 9 Geography (CGC1W): C1.7, careers including the marine sector (examples include the Seaway's ports)
  • Grade 7 History, Canada, 1800–1850: B3.4, the construction of canals and railway lines (example)
  • Grade 8 History, Creating Canada, 1850–1890: A1.1, the construction of the transcontinental railway (example); A3.1, how the railway affected First Nations and Métis trade and economies (example)

Ontario links give the expectation numbers, checked in October 2026 against the curriculum in force on the Ontario Curriculum and Resources site; "example" means the lakes appear in the Ministry's examples or prompts, not as a required expectation. They're a planning aid, not an official alignment.

Michigan

Science

  • 3-5-ETS1-2 (Grades 3–5, Engineering Design) compare solutions to a design problem
  • MS-ESS3-3 (Grades 6–8, Earth and Space Sciences) monitor and reduce human impact on the environment
  • MS-ETS1-1 (Grades 6–8, Engineering Design) criteria and constraints of a design

Social studies

  • 3-G4.0.1 (Grade 3, Geography) Describe major kinds of economic activity in Michigan today, such as agriculture, forestry, manufacturing, services and tourism, and research and development, and explain the factors influencing the location of these economic activities.
  • 3-G4.0.3 (Grade 3, Geography) Describe some of the current movements of goods, people, jobs, or information to, from, or within Michigan and explain reasons for the movements.
  • 4-H3.0.4 (Grade 4, History) Describe how the relationship between the location of natural resources and the location of industries (after 1837) affected and continue to affect the location and growth of Michigan cities.
  • 6-G4.3.2 (Grade 6, Geography) Describe patterns of settlement and explain why people settle where they do and how people make their livings.

Michigan science links are the NGSS performance expectations, which Michigan adopted as its K–12 Science Standards; social studies codes are the content expectations in the Michigan K–12 Social Studies Standards, checked in November 2026 against MDE's published standards. They're a planning aid, not an official alignment.

Wisconsin

Science

  • SCI.ETS1.B.3-5 (Grades 3–5, Engineering, Technology and the Application of Science) Research on a problem should be carried out before beginning to design a solution. Testing a solution involves investigating how well it performs under a range of likely conditions.
  • SCI.ESS3.C.m (Grades 6–8, Earth and Space Sciences) Human activities have altered the hydrosphere, atmosphere, and lithosphere which in turn has altered the biosphere. Changes to the biosphere can have different impacts for different living things. Activities and technologies can be engineered to reduce people's impacts on Earth.
  • SCI.ETS1.A.m (Grades 6–8, Engineering, Technology and the Application of Science) The more precisely a design task's criteria and constraints can be defined, the more likely it is that the designed solution will be successful. Specification of constraints includes consideration of scientific principles and other relevant knowledge that are likely to limit possible solutions.

Social studies

  • SS.Geog2.d.m (Grades 6–8, Geography) Investigate the impact of rural decline and the growth of cities on a place. Analyze patterns of urbanization around the world.
  • SS.Geog3.b.m (Grades 6–8, Geography) Analyze spatial patterns of social and economic development in a variety of regions in the world. Identify how people, products, and ideas move between places (e.g., internet commerce, outsourcing).
  • SS.Econ2.c.m (Grades 6–8, Economics) Categorize factors of production and how they are combined to make goods and deliver services. Evaluate how profits influence sellers in markets.

Codes are the performance indicators in the Wisconsin Standards for Science (adopted 2017, kept after DPI's 2024 review) and the Wisconsin Standards for Social Studies (2018), checked in November 2026 against DPI's published standards; "example" means the lakes appear only as an example. They're a planning aid, not an official alignment.

In class
  • Build harbours in a tub and test breakwater shapes and gap directions.
  • Use the 3D tour to label the parts of a port, then find the same parts at a real port with the helm's Sail in.
  • Convert the six ports' figures to one unit and rank them; discuss why the ranking depends on what's counted.
  • Map your nearest port: what arrives by ship, and where does it go next?

Pick Ontario, Michigan or Wisconsin above; the curriculum map lists every lesson by expectation or standard. The Great Lakes Literacy Principles are from the Great Lakes Sea Grant Network; the labels here are our short paraphrases.

Sources

Written for In The Lakes in our own words, from public-domain and openly licensed government sources, with others cited for further reading. Figures are rounded. Spotted a mistake? Write to admin@inthelakes.ca.

A–Z · LOOK IT UP Glossary 370 lake words in plain language, from AIS to zooplankton. OPEN THE GLOSSARY →